VRF Indoor Unit


Low Static Pressure Duct Connected VRF Indoor Unit

Nominal cooling capacity of 7.1kW

Nominal cooling capacity kW 7.1
Nominal heating capacity kW 8.0
Power source 1 Phase 220-240V, 50Hz
Power consumption Cooling kW 0.08-0.08
Heating kW 0.07-0.07
Sound power level dB(A) 59
Sound pressure level (1) db(A) Hi:35 Me:31 Lo:28
Sound pressure level (2) db(A) Hi:41 Me:37 Lo:32
Exterior dimensions unit H x W x D mm 220x1150x565
Net weight kg 31
Air flow m3/min Hi:16 Me:13 Lo:9.5
Maximum external static pressure Pa Standard:10, Max:50
Outside air intake Possible from return duct
Air filter, Q'ty Filter set:UT-FL1EF/UT-FL2EF/UT-FL3EF(option)
Remote control(option) wired:RC-EX3A, RC-E5, RCH-E3 wireless:RCN-KIT4-E2
Installation data Refrigerant piping size mm(in) Liquid line:ø9.52(3/8") Gas line:ø15.88(5/8")
The data are measured under the following conditions(ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19oCWB, and outdoor temp. of 35°CDB.
Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
External static pressure of indoor unit is 10Pa.
The sound level indicates the value of rear-intake type with duct in anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
The data of nominal cooling and heating capacity and sound pressure level are measured with 10Pa of external static pressure.
Sound pressure levels are values when 2m supply duct and 1m return duct are connected.
1 : Mike position is 1.5m below unit, 2 : Mike position is 1m in front and 1m below the air supply duct.