×

SRK200VSAPZR

19.0 ( 5.2 ~ 22.4 ) Wall Mounted Multi Split PAC

SRK200VSAPZR

Wall Mounted : 19.0 ( 5.2 ~ 22.4 )

Indoor Unit - SRK100ZR-S x 2 / Outdoor Unit - FDC200VSA
Nominal cooling capacity of 19.0kW

R410A
  • SRK100ZR-S x 2
  • SRK100ZR-S x 2

    Indoor Unit : SRK100ZR-S x 2

    FDC200VSA

    Outdoor Unit : FDC200VSA

  • FDC200VSA
Indoor unit SRK100ZR-S x 2
Outdoor unit FDC200VSA
Power source 3 Phase 380-415V, 50Hz / 380V, 60Hz
Nominal cooling capacity (Min-Max) kW 19.0 ( 5.2 ~ 22.4 )
Nominal heating capacity (Min-Max) kW 22.4 ( 3.3 ~ 25.0 )
Power Consumption Cooling/Heating kW 7.52 / 7.41
EER/COP Cooling/Heating kW 2.53 / 3.02
Inrush current A 5
Max. current A 20
Sound power level*1 Indoor*3 Cooling/Heating dB(A) 63 / 63
Outdoor Cooling/Heating 72 / 74
Sound pressure
level*1
Indoor*3 Cooling (P-Hi/Hi/Me/Lo) 48 / 45 / 40 / 27
Heating (P-Hi/Hi/Me/Lo) 48 / 43 / 38 / 30
Outdoor Cooling/Heating 58 / 59
Air flow Indoor*3 Cooling (P-Hi/Hi/Me/Lo) m3/min 24.5 / 21.3 / 17.6 / 10.4
Heating (P-Hi/Hi/Me/Lo) 27.5 / 23.2 / 19.1 / 13.6
Outdoor Cooling/Heating 135 / 135
Exterior
dimensions
Indoor HeightxWidthxDepth mm 339 x 1,197 x 262
Outdoor mm 1,300 x 970 x 370
Net weight Indoor/Outdoor kg 16.5 / 115
Refrigerant Type GWP R410A/2088
Ref.piping size Liquid/Gas ømm 9.52(3/8") / 22.22(7/8")
Refrigerant line (one way) length m Max.70
Vertical height differences Outdoor is higher/lower m Max.30 / Max.15
Outdoor operating temperature range Cooling*2 °C -15~50
Heating °C -15~20
Air filter, Q'ty Polypropylene net x2 (Washable)
Remote control (option) wired:RC-EX3A, RC-E5, RCH-E3 & Interface kit:SC-BIKN2-E
The data is measured under the following conditions (ISO-T1, -H1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions
  2. : If a cooling operation is conducted when the outdoor air temperature is —5°C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind, if wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down