×

FDU100VNP1VF2

10.0 ( 2.8 ~ 11.2 ) High Static Pressure Duct Connected Single Split PAC

FDU100VNP1VF2

High Static Pressure Duct Connected : 10.0 ( 2.8 ~ 11.2 )

Indoor Unit - FDU100VF2 / Outdoor Unit - FDC100VNP
Nominal cooling capacity of 10.0kW

  • FDU100VF2
  • FDU100VF2

    Indoor Unit : FDU100VF2

    FDC100VNP

    Outdoor Unit : FDC100VNP

  • FDC100VNP
Indoor unit FDU100VF2
Outdoor unit FDC100VNP
Power source 1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min~Max) kW 10.0 ( 2.8 ~ 11.2 )
Nominal heating capacity (Min~Max) kW 11.2 ( 2.5 ~ 12.5 )
Power consumption Cooling/Heating kW 3.00 / 2.93
EER/COP Cooling/Heating 3.33 / 3.82
Inrush current A 5
Max. running current A 22.0
Sound power
level*1
Indoor Cooling/Heating dB(A) 65 / 65
Outdoor Cooling/Heating 70 / 70
Sound pressure
level*1
Indoor Cooling (Hi/Me/Lo/Ulo) 44 / 38 / 36 / 30
Heating (Hi/Me/Lo/Ulo) 44 / 38 / 36 / 30
Outdoor Cooling/Heating 57 / 61
Air flow Indoor Cooling (Hi/Me/Lo/Ulo) m3/min 36 / 28 / 25 / 19
Heating (Hi/Me/Lo/Ulo) 36 / 28 / 25 / 19
Outdoor Cooling/Heating 75 / 79
Available external static pressure Pa Standard:60 Max:200
Exterior Dimensions Indoor Height x Width x Depth mm 280 x 1,370 x 740
Outdoor 845 x 970 x 370
Net weight Indoor / Outdoor kg 54 / 70
Refrigerant Type/GWP R410A/1975
Refrigerant Charge kg/TCO2Eq 2.55/5.324
Refrigerant piping size Liquid/Gas ø mm 9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) length m Max.30
Vertical height differences Outdoor is higher/lower m Max.20 / Max.20
Outdoor operating
temperature range
Cooling*2 °C -15~46
Heating -15~20
Air filter quantity Procure locally
Remote control (option) wired:RC-EX3A, RC-E5, RCH-E3 wireless:RCN-KIT4-E2
Energy Class (Cooling/Heating) A++/A+
SEER 6.36
SCOP (Average climate) 4.13
Pdesign (cooling/heating(@-10°C)) kW 10.0/8.1
Annual Electricity Consumption (cooling/heating) kWh/a 551/2746
Designated Heating Season Average
The data is measured under the following conditions(ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
*1 Sound power level: Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions
*2 Sound pressure level: If a cooling operation is conducted when the outdoor air temperature is —5°C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind, if wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down
External static pressure is changeable to be set by the remote control. MAX external static pressure is "High static pressure" setting. The values of sound pressure level become 5dB(A) higher at external static pressure of 200Pa.