×

FDT140VNXWVH

14.0 ( 3.5 ~ 16.0 ) Ceiling Cassette Single Split PAC

FDT140VNXWVH

Ceiling Cassette : 14.0 ( 3.5 ~ 16.0 )

Indoor Unit - FDT140VH / Outdoor Unit - FDC140VNX-W
Nominal cooling capacity of 14.0kW

R32
  • FDT140VH
  • FDT140VH

    Indoor Unit : FDT140VH

    FDC140VNX-W

    Outdoor Unit : FDC140VNX-W

  • FDC140VNX-W
Indoor unitFDT140VH
Outdoor unitFDC140VNX-W
Power source1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min~Max)kW14.0 ( 3.5 ~ 16.0 )
Nominal heating capacity (Min~Max)kW16.0 ( 2.7 ~ 18.0 )
Power consumptionCooling/HeatingkW3.87 / 4.20
EER/COPCooling/Heating3.62 / 3.81
Inrush currentA5
Max. running currentA27
Sound power
level*1
IndoorCooling/HeatingdB(A)63 / 64
OutdoorCooling/Heating69 / 71
Sound pressure
level*1
IndoorCooling (Hi/Me/Lo/Ulo)48 / 42 / 39 / 32
Heating (Hi/Me/Lo/Ulo)48 / 41 / 38 / 31
OutdoorCooling/Heating54 / 54
Air flowIndoorCooling (Hi/Me/Lo/Ulo)m3/min38 / 29 / 26 / 19
Heating (Hi/Me/Lo/Ulo)38 / 29 / 26 / 19
OutdoorCooling/Heating100 / 100
Exterior DimensionsIndoorHeight x Width x DepthmmUnit: 298 x 840 x 840 Panel: 35 x 950 x 950
Outdoor1,300 x 970 x 370
Net weightIndoor / Outdoorkg30(Unit:25 Standard Panel:5) / 97
RefrigerantType/GWPR32/675
Refrigerant piping sizeLiquid/Gasø inch9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) lengthmMax.100
Vertical height differencesOutdoor is higher/lowermMax.50 / Max.15
Outdoor operating
temperature range
Cooling*2°C-15~50
Heating-20~20
PanelT-PSA-5BW-E, T-PSAE-5BW-E (White) / T-PSA-5BB-E, T-PSAE-5BB-E (Black)
Air filter quantityPocket plastic net x 1(Washable)
Remote control (option)wired: RC-EX3A, RC-E5, RCH-E3 wireless: RCN-T-5BW-E2, RCN-T-5BB-E2
SEER7.20
SCOP (Average climate)4.35
The data is measured under the following conditions (ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
  2. : If a cooling operation is conducted when the outdoor air temperature is –5 ̊C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.