×

FDT125VSAVH

12.5 ( 5.0 ~ 14.0 ) Ceiling Cassette Single Split PAC

FDT125VSAVH

Ceiling Cassette : 12.5 ( 5.0 ~ 14.0 )

Indoor Unit - FDT125VH / Outdoor Unit - FDC125VSA
Nominal cooling capacity of 10.0kW

R410A
  • FDT125VH
  • FDT125VH

    Indoor Unit : FDT125VH

    FDC125VSA

    Outdoor Unit : FDC125VSA

  • FDC125VSA
Indoor unitFDT125VH
Outdoor unitFDC125VSA
Power source3 Phase 380-415V, 50Hz / 380V, 60Hz
Nominal cooling capacity (Min~Max)kW12.5 ( 5.0 ~ 14.0 )
Nominal heating capacity (Min~Max)kW14.0 ( 4.0 ~ 16.0 )
Power consumptionCooling/HeatingkW4.05 / 3.74
EER/COPCooling/Heating3.09 / 3.74
Inrush currentA5
Max. running currentA15
Sound power
level*1
IndoorCooling/HeatingdB(A)63 / 64
OutdoorCooling/Heating71 / 71
Sound pressure
level*1
IndoorCooling (Hi/Me/Lo/Ulo)48 / 41 / 39 / 31
Heating (Hi/Me/Lo/Ulo)48 / 41 / 38 / 31
OutdoorCooling/Heating55 / 57
Air flowIndoorCooling (Hi/Me/Lo/Ulo)m3/min38 / 28 / 25 / 18
Heating (Hi/Me/Lo/Ulo)38 / 28 / 25 / 18
OutdoorCooling/Heating75 / 73
Exterior DimensionsIndoorHeight x Width x DepthmmUnit: 298 x 840 x 840 Panel: 35 x 950 x 950
Outdoor845 x 970 x 370
Net weightIndoor / Outdoorkg30(Unit:25 Standard Panel:5) / 82
RefrigerantType/GWPR410A/2088
Refrigerant piping sizeLiquid/Gasø mm9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) lengthmMax.50
Vertical height differencesOutdoor is higher/lowermMax.50 / Max.15
Outdoor operating
temperature range
Cooling*2°C-15~50
Heating-20~20
PanelT-PSA-5BW-E, T-PSAE-5BW-E (White) / T-PSA-5BB-E, T-PSAE-5BB-E (Black)
Air filter quantityPocket plastic net x 1(Washable)
Remote control (option)wired: RC-EX3A, RC-E5, RCH-E3 wireless: RCN-T-5BW-E2, RCN-T-5BB-E2
SEER6.52
SCOP (Average climate)4.38
Designated Heating SeasonAverage
The data is measured under the following conditions (ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
  2. : If a cooling operation is conducted when the outdoor air temperature is –5 ̊C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
  3. : The values are for one indoor unit operation. (Multi system only)