×

FDF140VNXVD

14.0 ( 5.0 ~ 16.0 ) Floor Standing Single Split PAC

FDF140VNXVD

Floor Standing : 14.0 ( 5.0 ~ 16.0 )

Indoor Unit - FDF140VD / Outdoor Unit - FDC140VNX
Nominal cooling capacity of 14.0kW

R410A
  • FDF140VD
  • FDF140VD

    Indoor Unit : FDF140VD

    FDC140VNX

    Outdoor Unit : FDC140VNX

  • FDC140VNX
Indoor unitFDF140VD
Outdoor unitFDC140VNX
Power source1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min~Max)kW14.0 ( 5.0 ~ 16.0 )
Nominal heating capacity (Min~Max)kW16.0 ( 4.0 ~ 18.0 )
Power consumptionCooling/HeatingkW4.65 / 4.69
EER/COPCooling/Heating3.01 / 3.41
Inrush currentA5
Max. running currentA26
Sound power
level*1
IndoorCooling/HeatingdB(A)73 / 73
OutdoorCooling/Heating72 / 72
Sound pressure
level*1
IndoorCooling (Hi/Me/Lo/Ulo)54 / 50 / 48 / 44
Heating (Hi/Me/Lo/Ulo)54 / 50 / 48 / 44
OutdoorCooling/Heating49 / 52
Air flowIndoorCooling (Hi/Me/Lo/Ulo)m3/min29 / 26 / 23 / 19
Heating (Hi/Me/Lo/Ulo)29 / 26 / 23 / 19
OutdoorCooling/Heating100 / 100
Exterior DimensionsIndoorHeight x Width x Depthmm1,850 x 600 x 320
Outdoor1,300 x 970 x 370
Net weightIndoor / Outdoorkg52 / 105
RefrigerantType/GWPR410A/2088
Refrigerant piping sizeLiquid/Gasø inch9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) lengthmMax.100
Vertical height differencesOutdoor is higher/lowermMax.30 / Max.15
Outdoor operating
temperature range
Cooling*2°C-15~43
Heating-20~20
Air filter quantityPlastic net x 1(washable)
Remote control (option)wired:RC-E5 (installed) wireless:RCN-KIT4-E2 (option)
SEER4.80
SCOP (Average climate)3.56
The data is measured under the following conditions (ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
  2. : If a cooling operation is conducted when the outdoor air temperature is –5 ̊C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.