×

FDF140VNAVD

13.0 ( 5.0 ~ 13.0 ) Floor Standing Single Split PAC

FDF140VNAVD

Floor Standing : 13.0 ( 5.0 ~ 13.0 )

Indoor Unit - FDF140VD / Outdoor Unit - FDC140VNA
Nominal cooling capacity of 14.0kW

  • FDF140VD
  • FDF140VD

    Indoor Unit : FDF140VD

    FDC140VNA

    Outdoor Unit : FDC140VNA

  • FDC140VNA
Indoor unit FDF140VD
Outdoor unit FDC140VNA
Power source 1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min~Max) kW 13.0 ( 5.0 ~ 13.0 )
Nominal heating capacity (Min~Max) kW 15.5 ( 4.0 ~ 16.5 )
Power consumption Cooling/Heating kW 5.02 / 4.98
EER/COP Cooling/Heating 2.59 / 3.11
Inrush current A 5
Max. running current A 24
Sound power
level*1
Indoor Cooling/Heating dB(A) 73 / 73
Outdoor Cooling/Heating 73 / 73
Sound pressure
level*1
Indoor Cooling (Hi/Me/Lo/Ulo) 54 / 50 / 48 / 44
Heating (Hi/Me/Lo/Ulo) 54 / 50 / 48 / 44
Outdoor Cooling/Heating 57 / 59
Air flow Indoor Cooling (Hi/Me/Lo/Ulo) m3/min 29 / 26 / 23 / 19
Heating (Hi/Me/Lo/Ulo) 29 / 26 / 23 / 19
Outdoor Cooling/Heating 75 / 73
Exterior Dimensions Indoor Height x Width x Depth mm 1,850 x 600 x 320
Outdoor 845 x 970 x 370
Net weight Indoor / Outdoor kg 52 / 80
Refrigerant Type/GWP R410A
Refrigerant piping size Liquid/Gas ø mm 9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) length m Max.50
Vertical height differences Outdoor is higher/lower m Max.50 / Max.15
Outdoor operating
temperature range
Cooling*2 °C -15~50
Heating -20~20
Air filter quantity Plastic net x 1(Washable)
Remote control (option) wired:RC-E5 (installed) wireless:RCN-KIT4-E2 (option)
SEER 5.09
SCOP (Average climate) 4.16
The data is measured under the following conditions(ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
*1 Sound power level: Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions
*2 Sound pressure level: If a cooling operation is conducted when the outdoor air temperature is —5°C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind, if wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down
External static pressure is changeable to be set by the remote control. MAX external static pressure is "High static pressure" setting. The values of sound pressure level become 5dB(A) higher at external static pressure of 200Pa.