×

FDF140VNAPVD1

13.6 ( 5.0 ~ 14.5 ) Floor Standing Multi Split PAC

FDF140VNAPVD1

Floor Standing : 13.6 ( 5.0 ~ 14.5 )

Indoor Unit - FDF71VD1 x 2 / Outdoor Unit - FDC140VNA
Nominal cooling capacity of

  • FDF71VD1 x 2
  • FDF71VD1 x 2

    Indoor Unit : FDF71VD1 x 2

    FDC140VNA

    Outdoor Unit : FDC140VNA

  • FDC140VNA
Indoor unit FDF71VD1 x 2
Outdoor unit FDC140VNA
Power source 1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min-Max) kW 13.6 ( 5.0 ~ 14.5 )
Nominal heating capacity (Min-Max) kW 15.5 ( 4.0 ~ 16.5 )
Power Consumption Cooling/Heating kW 5.15 / 4.35
EER/COP Cooling/Heating kW 2.64 / 3.56
Inrush current A 5
Max. current A 24
Sound power level*1 Indoor*3 Cooling/Heating dB(A) 61 / 61
Sound power level*1 Outdoor Sound power level dB(A) 73 / 73
Sound pressure level*1 Indoor*3 Cooling (P-Hi/Hi/Me/Lo) dB(A) 42 / 39 / 35 / 33
Indoor Heating (P-Hi/Hi/Me/Lo) dB(A) 42 / 39 / 35 / 33
Outdoor Cooling/Heating dB(A) 57 / 59
Air flow Indoor*3 Cooling (P-Hi/Hi/Me/Lo) m3/min 18 / 16 / 14 / 12
Indoor Heating (P-Hi/Hi/Me/Lo) m3/min 18 / 16 / 14 / 12
Outdoor Cooling/Heating m3/min 75 / 73
Exterior
dimensions
Indoor HeightxWidthxDepth mm 1,850 x 600 x 320
Outdoor mm 845 x 970 x 370
Net weight Indoor/Outdoor kg 49 / 80
Refrigerant Type GWP R410A
Ref.piping size Liquid/Gas ømm 9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) length m Max.50
Vertical height differences Outdoor is higher/lower m Max.50 / Max.15
Outdoor operating temperature range Cooling*2 °C -15~50
Heating °C -20~20
Air filter, Q'ty Plastic net x 1(washable)
Remote control (option) wired:RC-E5 (installed) wireless:RCN-KIT4-E2
The data is measured under the following conditions(ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
*1: Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions
*2: If a cooling operation is conducted when the outdoor air temperature is —5°C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind, if wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down
*3: The values are for one indoor unit operation. (Multi system only)