×

FDE140VSAWVH

13.6 ( 5.0 ~ 14.5 ) Ceiling Suspended Single Split PAC

FDE140VSAWVH

Ceiling Suspended : 13.6 ( 5.0 ~ 14.5 )

Indoor Unit - FDE140VH / Outdoor Unit - FDC140VSA-W
Nominal cooling capacity of 13.6kW

R32
  • FDE140VH
  • FDE140VH

    Indoor Unit : FDE140VH

    FDC140VSA-W

    Outdoor Unit : FDC140VSA-W

  • FDC140VSA-W
Indoor unit FDE140VH
Outdoor unit FDC140VSA-W
Power source 3 Phase 380-415V, 50Hz / 380V, 60Hz
Nominal cooling capacity (Min~Max) kW 13.6 ( 5.0 ~ 14.5 )
Nominal heating capacity (Min~Max) kW 15.5 ( 4.0 ~ 16.5 )
Power consumption Cooling/Heating kW 5.05 / 4.18
EER/COP Cooling/Heating 2.69 / 3.71
Inrush current A 5
Max. running current A 15
Sound power
level*1
Indoor Cooling/Heating dB(A) 65 / 65
Outdoor Cooling/Heating 72 / 73
Sound pressure
level*1
Indoor Cooling (Hi/Me/Lo/Ulo) 49 / 45 / 40 / 36
Heating (Hi/Me/Lo/Ulo) 49 / 45 / 40 / 36
Outdoor Cooling/Heating 56 / 58
Air flow Indoor Cooling (Hi/Me/Lo/Ulo) m3/min 34 / 29 / 23 / 18
Heating (Hi/Me/Lo/Ulo) 34 / 29 / 23 / 18
Outdoor Cooling/Heating 75 / 73
Exterior Dimensions Indoor Height x Width x Depth mm 250 x 1,620 x 690
Outdoor 845 x 970 x 370
Net weight Indoor / Outdoor kg 43 / 78
Refrigerant Type/GWP R32/675
Refrigerant piping size Liquid/Gas ø mm 9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) length m Max.50
Vertical height differences Outdoor is higher/lower m Max.50 / Max.15
Outdoor operating
temperature range
Cooling*2 °C -15~50
Heating -20~20
Air filter quantity Pocket Plastic net x2(Washable)
Remote control (option) wired:RC-EX3A, RC-E5, RCH-E3 wireless:RCN-E-E3
SEER 5.76
SCOP (Average climate) 4.24
The data is measured under the following conditions (ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
  2. : If a cooling operation is conducted when the outdoor air temperature is –5 ̊C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
  3. : The values are for one indoor unit operation. (Multi system only)