×

FDE140VNAVH

13.6 ( 5.0 ~ 14.5 ) Ceiling Suspended Single Split PAC

FDE140VNAVH

Ceiling Suspended : 13.6 ( 5.0 ~ 14.5 )

Indoor Unit - FDE140VH / Outdoor Unit - FDC140VNA
Nominal cooling capacity of 14.0kW

R410A
  • FDE140VH
  • FDE140VH

    Indoor Unit : FDE140VH

    FDC140VNA

    Outdoor Unit : FDC140VNA

  • FDC140VNA
Indoor unitFDE140VH
Outdoor unitFDC140VNA
Power source1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min~Max)kW13.6 ( 5.0 ~ 14.5 )
Nominal heating capacity (Min~Max)kW15.5 ( 4.0 ~ 16.5 )
Power consumptionCooling/HeatingkW5.21/ 4.42
EER/COPCooling/Heating2.61 / 3.51
Inrush currentA5
Max. running currentA24
Sound power
level*1
IndoorCooling/HeatingdB(A)65 / 65
OutdoorCooling/Heating73 / 73
Sound pressure
level*1
IndoorCooling (Hi/Me/Lo/Ulo)49 / 45 / 40 / 36
Heating (Hi/Me/Lo/Ulo)49 / 45 / 40 / 36
OutdoorCooling/Heating57 / 59
Air flowIndoorCooling (Hi/Me/Lo/Ulo)m3/min34 / 29 / 23 / 18
Heating (Hi/Me/Lo/Ulo)34 / 29 / 23 / 18
OutdoorCooling/Heating75 / 73
Exterior DimensionsIndoorHeight x Width x Depthmm250 x 1,620 x 690
Outdoor845 x 970 x 370
Net weightIndoor / Outdoorkg43 / 80
RefrigerantType/GWPR410A/2088
Refrigerant piping sizeLiquid/Gasø mm9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) lengthmMax.50
Vertical height differencesOutdoor is higher/lowermMax.50 / Max.15
Outdoor operating
temperature range
Cooling*2°C-15~50
Heating-20~20
Air filter quantityPocket Plastic net x2(Washable)
Remote control (option)wired:RC-EX3A, RC-E5, RCH-E3 wireless:RCN-E-E3
SEER5.76
SCOP (Average climate)4.15
The data is measured under the following conditions (R32 : ISO-T1, -H1 /, R410A:ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
  2. : If a cooling operation is conducted when the outdoor air temperature is –5 ̊C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
  3. : The values are for one indoor unit operation. (Multi system only)