×

FDE125VNAVH

12.5 ( 5.0 ~ 14.0 ) Ceiling Suspended Single Split PAC

FDE125VNAVH

Ceiling Suspended : 12.5 ( 5.0 ~ 14.0 )

Indoor Unit - FDE125VH / Outdoor Unit - FDC125VNA
Nominal cooling capacity of 12.5kW

R410A
  • FDE125VH
  • FDE125VH

    Indoor Unit : FDE125VH

    FDC125VNA

    Outdoor Unit : FDC125VNA

  • FDC125VNA
Indoor unitFDE125VH
Outdoor unitFDC125VNA
Power source1 Phase 220-240V, 50Hz / 220V, 60Hz
Nominal cooling capacity (Min~Max)kW12.5 ( 5.0 ~ 14.0 )
Nominal heating capacity (Min~Max)kW14.0 ( 4.0 ~ 16.0 )
Power consumptionCooling/HeatingkW4.45 / 3.74
EER/COPCooling/Heating2.81 / 3.74
Inrush currentA5
Max. running currentA24
Sound power
level*1
IndoorCooling/HeatingdB(A)64 / 64
OutdoorCooling/Heating71 / 71
Sound pressure
level*1
IndoorCooling (Hi/Me/Lo/Ulo)48 / 45 / 40 / 35
Heating (Hi/Me/Lo/Ulo)48 / 45 / 40 / 35
OutdoorCooling/Heating55/ 57
Air flowIndoorCooling (Hi/Me/Lo/Ulo)m3/min32 / 29 / 23 / 17
Heating (Hi/Me/Lo/Ulo)32 / 29 / 23 / 17
OutdoorCooling/Heating75 / 73
Exterior DimensionsIndoorHeight x Width x Depthmm250 x 1,620 x 690
Outdoor845 x 970 x 370
Net weightIndoor / Outdoorkg43 / 80
RefrigerantType/GWPR410A/2088
Refrigerant piping sizeLiquid/Gasø mm9.52(3/8") / 15.88(5/8")
Refrigerant line (one way) lengthmMax.50
Vertical height differencesOutdoor is higher/lowermMax.50 / Max.15
Outdoor operating
temperature range
Cooling*2°C-15~50
Heating-20~20
Air filter quantityPocket Plastic net x2(Washable)
Remote control (option)wired:RC-EX3A, RC-E5, RCH-E3 wireless:RCN-E-E3
SEER6.03
SCOP (Average climate)4.30
The data is measured under the following conditions (R32 : ISO-T1, -H1 /, R410A:ISO-T1).
Cooling: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB. Heating: Indoor temp. of 20°CDB, and outdoor temp. of 7°CDB, 6°CWB.
  1. : Indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.
  2. : If a cooling operation is conducted when the outdoor air temperature is –5 ̊C or lower, the outdoor unit should be installed at a place where it is not influenced by natural wind. If wind blows, the low pressure will drop and compressor frequency will increase, this will cause the capacity to drop and may cause the unit to break down.
  3. : The values are for one indoor unit operation. (Multi system only)